BYD TANG 2024 - Maintenance Information

Maintenance
Information
Maintenance Cycle and
Items
Maintenance Schedule
Vehicle maintenance is performed based
on the mileages or months, whichever
comes 󽗉rst.
Item Interval
Brake friction block and disc Check every 24 months or 30,000 km
Brake piping and hoses Check every 24 months or 30,000 km
Steering wheel and tie rod Check every 24 months or 30,000 km
Drive shaft boot Check every 24 months or 30,000 km
Ball pin and boot Check every 24 months or 30,000 km
Front and rear suspensions Check every 24 months or 30,000 km
Tire condition and in󽗊ation pressure, incl.
TPMS
Check every 24 months or 30,000 km
Tire wear (check front and rear wheel
alignment when tire uneven wear is greater
than 2 mm)
Check during maintenance and rotate
when necessary; Under severe working
conditions, check more frequently and
rotate when necessary
EPS corrosion and foreign materials on
or ablation of connectors, including wiring
harness GND point
Check every 24 months or 30,000 km
Coolant level in expansion tank Check every 24 months or 30,000 km
Brake 󽗊uid Check every 24 months or 30,000 km
Bumps or deformation of the high-voltage
battery tray, crash bar, shield, and
explosion-proof valve, and powertrain leaks
Check every 24 months or 30,000 km
A/C 󽗉lter
Check every 24 months or 30,000 km. In
severe driving conditions, check every six
months and replace if necessary
186