BYD TANG 2024 - Infotainment System

Infotainment
System
Infotainment Touchscreen
When the ignition is switched on, the
initial screen is displayed for several
seconds and the infotainment system
starts to work. To better experience
infotainment functions, such as apps and
Internet calls, the system must be used
after network connection.
① Infotainment touchscreen
② Scroll button
●
Scroll up to turn volume up or down
to turn volume down. Volume ranges
from 0 to 39. A mute icon is displayed
when volume is 0.
●
With the infotainment system on,
press the scroll button to mute the
sound and enter the screen saver
interface or turn o󽗈 the screen (set the
screen saver through the infotainment
touchscreen→
→ System →
Display). Press the scroll button again
to turn o󽗈 the mute and turn on the
screen.
●
Press and hold the scroll button
for three seconds to restart the
infotainment system.
Reset to factory settings
●
This function factory resets the
infotainment system.
●
During the process, do not touch any
infotainment button or turn o󽗈 the
power supply, or errors may occur.
●
The process takes two to 󽗉ve
minutes.
WARNING
●
Do not use a high-power inverter
in the vehicle, as this may cause
infotainment system malfunction.
●
Do not format or root the device
without authorization, as this may
cause infotainment system or
vehicle malfunction.
●
In driving, please use the
infotainment system in landscape
mode wherever possible for your
safety.
CAUTION
●
To prevent damage to the
touchscreen:
●
Touch the screen gently. If there
is no response, remove 󽗉nger
from the screen, then touch it
again.
●
Clean the screen with a soft
damp cloth. Do not use any
cleaning product.
●
Using the touchscreen
●
When the screen temperature is
low, the image displayed may be
darker or the system may work
slightly slower than normal.
●
The screen may be dark or
di󽗋cult to see when you are
wearing sunglasses. In that case,
change the viewing angle or take
o󽗈 the sunglasses.
164