●
The vehicle's pitch or roll has
been changed (with the tilt or lift
exceeding the alarm threshold).
●
In-cabin motion sensor has detected
unauthorized intrusion by a person
or object.
●
The door has been opened with the
mechanical key when the vehicle is
locked.
Disarming the system
●
Anti-theft alarm can be stopped by:
●
Unlock the doors or the trunk with a
valid smart key.
●
Using the microswitch to unlock the
door by carrying a valid smart key.
●
Opening the trunk remotely with a
valid smart key.
●
Use a valid NFC (card or phone) key
to unlock the door.
●
Starting the vehicle remotely with a
valid smart key.
●
Pressing the START/STOP button
inside the vehicle while carrying a
valid smart key.
WARNING
●
Do not modify the anti-theft alarm
system by means of alteration or
addition, otherwise the system
may fail.
●
If a fault occurs, go to a
BYD authorized dealer or service
provider for inspection and repair
as soon as possible.
Anti-theft Indicator
When the anti-theft system is enabled,
the anti-theft indicator is steady on for 10
seconds.
Data Collection and
Processing
Data Collection and
Processing
●
This section provides you with
some important information on how
personal data is collected and
processed when you use a BYD vehicle.
●
For a more detailed overview on data
processing, data protection and data
subject rights, please read the current
version of the privacy policy for the
vehicle available at the infotainment
system (Vehicle → System → More →
Privacy Policy).
●
This vehicle is equipped with an
event data recording (EDR) system.
EDR mainly records data in the
event of a crash or near-crash
(for example, airbag deployment or
hitting on a roadside obstacle) to
help comprehend the vehicle system
operation, such as:
●
Vehicle velocity
●
Tire pressure condition
●
Adaptive cruise control (ACC) system
status
●
Whether the seat belt is fastened
30
To Next Page
Loading...
