BYD TANG 2024 - Adjusting Front Seats

WARNING
●
Do not adjust the driver's seat
while the vehicle is in motion, as
unpredictable seat movement can
cause the loss of vehicle control.
●
Do not drive the vehicle until
occupants are seated properly.
CAUTION
●
When folding seats, make sure no
seat belt is damaged.
●
Adjust the seat position before
fastening the seat belt.
●
While adjusting a seat, do not let
it hit against any passenger or the
luggage.
Adjusting Front Seats
Adjusting Front Seat with Power
Front seat adjustment includes position
adjustment, seatback angle adjustment,
lumbar support adjustment, massage
adjustment, and leg support adjustment.
The front passenger's seat does not
support height adjustment or cushion
angle adjustment. Choose the following
methods according to the actual
con󽗉guration of your vehicle.
1. Seatback angle adjustment switch
●
Move this switch forward or
backward to adjust the seatback
angle.
2. Seat position adjustment switch
Seat position adjustment includes
forward/backward adjustment,
cushion angle adjustment*, and height
adjustment*.
●
Toggle the seat position adjustment
switch back or forth to move the seat
backward or forward.
●
Move the front end of the switch up
or down to change the seat cushion
angle.
●
Move the rear end of the switch up or
down to raise or lower the seat.
3. Lumbar support adjustment switch
The seatback pro󽗉le can be adjusted
to 󽗉t the curvature of the occupant's
lumbar spine. To allow you and your
occupants to sit in the seats in a
correct and relaxed manner, the seat
support should support the occupants'
lumbar spine.
●
Press the front or rear portion of the
switch to increase or decrease the
curvature.
●
Press the upper or lower portion of
the switch to extend the curvature up
or down.
4. Seat massage switch
●
The massage button is at
the center of the lumbar support
adjustment button. Press it to start or
stop massage. You can also enable or
disable the massage function on the
infotainment touchscreen.
●
Massage cannot be used with
lumbar support activated. When
the massage is activated, the
direction buttons work for massage
adjustment; otherwise, they work for
63
03
CONTROLLER OPERATION