BYD TANG 2024 - Parking Assist System

CAUTION
comparison with the actual
object.
●
The distance to an object
displayed on the panoramic view
screen may be di󽗈erent from the
distance perceived subjectively,
especially when the object is
closer to the vehicle. Assess the
distance in various ways.
●
To prevent a󽗈ecting camera
performance, avoid spraying
directly on the cameras when
washing the vehicle body with
high-pressure water. Wipe any
water or dust o󽗈 the camera in
time.
●
After the vehicle is powered on,
if you press the panoramic view
start button or shift into reverse
while the infotainment system is
not fully activated, the output on
the panoramic view screen will
be delayed or the screen will
󽗊ash. This is a normal part of the
camera power-on process.
●
When the vehicle runs at a low
speed, the transparent panoramic
view function is a󽗈ected by speed
󽗊uctuation or multiple stops,
so there will be misalignment
between the images below the
vehicle and that outside the
vehicle.
●
The brightness of the reversing
image can be varied depending
on the touchscreen brightness.
Adjust the brightness as you
desire.
Parking Assist System
●
During vehicle parking, the parking
assist system detects obstacles by
sensors, and prompts the driver with
the proximity of obstacles by an image
on the infotainment touchscreen* and
a speaker alarm.
●
The parking assist system helps
with reversing. Pay attention to the
environment behind and around the
vehicle during reversing.
●
When you reverse the vehicle, a
reversing image* will be displayed
on the infotainment touchscreen
automatically.
●
For your driving safety, when the
reversing image is displayed, all
buttons will be disabled except some
volume and calls-related buttons.
●
After reversing ends, the interface will
be restored.
CAUTION
●
The parking assist system ceases
to operate when the vehicle is
moving forward at over 10 km/h.
●
Do not place any articles within
the sensors' working range.
●
To prevent sensor malfunction, do
not wash the sensor area with
water or steam.
Parking Radar Switch
●
Turn the parking radar system on or
o󽗈 with the parking radar switch or on
infotainment touchscreen → ADAS
→ Parking Assist.
●
When the ignition is switched on and
EPB is released, the parking assist
system is enabled automatically.
●
When enabled, the system raises
an alarm if obstacles are found
surrounding the vehicle; when
disabled, it does not.
152