Status LED Indicator
Ignition on and self-check passed Solid on if self-check is passed
E-Call connecting Flashing - 1 Hz
E-Call connected Flashing - 1 Hz
E-Call ended Solid on
Callback time (60 minutes by default) Flashing extremely slowly - 0.2 Hz
Hazard Warning Light
Switch
When the button is pressed, all turn
signals and turn signal indicators on the
instrument cluster start ashing. They
all stop ashing when the button is
pressed again.
Sunroof Switch
The sunroof can only be operated when
the vehicle is powered on or when the
power-o delay has not expired.
Opening the sunroof
●
Press and hold the sunroof open
button ① to open the sunroof. Release
the button midway to stop the sunroof
at its current position.
●
Release the button ① immediately
after pressing it. The sunroof opens
automatically. For the sunroof to stop,
press button ① or ② midway.
Closing the sunroof
●
Press and hold the sunroof close
button ② to close the sunroof. The
sunroof will stop if the button is
released.
●
If the sunroof has been initialized,
releasing the sunroof close button ②
immediately after touching it closes
the sunroof automatically. For the
sunroof to stop at its current position,
press the ① or ② button midway.
Opening/Closing Sunshade
Opening the sunshade
●
Press and hold the sunshade open
button ① to open the sunshade.
Release the button midway to stop the
sunshade.
●
Release the button ① immediately
after touching it. The sunshade opens
automatically. For the sunshade to
stop at its current position, press
button ① or ② midway.
84
To Next Page
Loading...
