BYD TANG 2024 - Page 175

●
Tap a second time to deactivate it.
Outside PM2.5 value and level
●
The area displays the PM2.5 value and
level outside the vehicle.
In-vehicle PM2.5 value and level
display
●
The area displays the PM2.5 value and
level inside the vehicle.
REMINDER
●
The PM2.5 value detected by the
on-board air puri󽗉cation (PM2.5)
detector is the PM2.5 value in
the air near the vehicle carrying
the device in a short time, which
should be di󽗈erent from the
daily or real-time PM2.5 value
declared by national and relevant
government authorities.
●
Reduce the frequency of PM2.5
detection in the following
environments:
●
Sandstorms and other such
extremely harsh environments;
●
Cold regions (ambient
temperature <-20℃);
●
High humidity environments
(relative humidity >90%);
●
Environments with a change
in temperature (prone to
condensation), such as driving
in from a cold environment
to a high-temperature indoor
environment or parking lot.
●
Running maximum fan speed in
recirculation mode can quickly
reduce the concentration of 󽗉ne
particles in the air inside the
vehicle.
A/C Settings
●
To access the A/C setting interface, go
to → Vehicle → A/C.
① Auto A/C mode
●
Two options are available: economical
and comfort.
② Remotely controlled air conditioner
running time
●
Tap this button to set the time for
remote A/C running.
③ Automatic puri󽗉cation
●
Tap this button to enable auto
puri󽗉cation function.
●
Tap this button a second time to
disable it.
④ Auto air recirculation
●
Tap this button to enable this setting.
●
Tap this button a second time to
disable it.
⑤ Fan speed reduction during calls
●
Tap this button to enable this setting.
174