BYD TANG 2024 - Page 183

CAUTION
wireless charger area when
the wireless charger system is
working.
●
To avoid wireless charger
dysfunction or even accidents, do
not place coins, metal keys, metal
rings, or other articles containing
metal in the wireless charger area
together with the phone.
●
To avoid damage to the charger
area, do not place heavy objects
on it.
●
If the phone wireless charger
system is faulty and does not work
properly, it is recommended to
contact a BYD authorized dealer
or service provider.
●
BYD will not assume any
responsibility for any problems
caused by improper use. If
the product is disassembled or
modi󽗉ed, the free warranty will be
terminated.
●
For safety reasons, do not leave an
unattended phone being charged
in the vehicle.
●
For safety reasons, refrain from
checking phone charging status
while driving.
●
If a metal item is found between
the device and the charger rubber
pad during charging, do not
remove the metal item with bare
hands to prevent burning.
●
The center of the phone coil must
be aligned with the center of
wireless charger (indicated with
text in the charging area), or
charging may fail.
●
Prevent any 󽗊uid from coming
into contact with the charger
CAUTION
area. The wireless charger will
malfunction if water enters the
wireless charger via the gap
around the rubber mat.
●
Charging may stop at high
temperatures, and will resume
once the temperature drops.
●
BYD makes no commitments for
problems caused by external
wireless charging coils. Please use
with caution.
●
The wireless phone charger
system can charge Qi-certi󽗉ed
phones, and non-Qi-certi󽗉ed
phones are not guaranteed for
normal charging.
●
To avoid burning cards with chips,
such as NFC cards and bank cards,
do not place them between the
phone case and the phone during
charging.
REMINDER
●
Only one phone can be charged at
a time.
●
A phone case that is too thick may
prevent charging.
●
On bumpy roads, the
wireless phone charging may
intermittently stop and then
resume.
●
Try to ensure that the surface on
which a mobile phone is placed is
parallel to the charging module.
If the phone moves from the
wireless charger area and stops
charging, move it back.
●
If the phone cannot be charged
properly, ensure that there are
no foreign objects in the wireless
182