C-Nav Hardware Reference Guide
82
Table 4-1: Coax-Seal Product Specifications
COAX-SEAL PRODUCT SPECIFICATIONS
60” consumer rolls, 3/32" thick x 1/2" wide, in retail packaging for
pegboard or counter display.
• 12’ industrial rolls, 3/32" thick x 1/2" wide or 1” wide.
• Pre-cut strips, 3/32" thick x 1/2" wide, in 10” and 4” lengths, bulk-packed.
• 10” strip or (2) 4” strips in envelope, with complete instructions for use.
Easily applied, hand-moldable, tacky black plastic mastic, on peel-away paper
backing, suitable for waterproofing a wide variety of connections. Adheres to
vinyl and PVC outer jackets. Product is non-conductive, non-contaminating and
non-toxic, and UV-stable.
Provides a long-lasting, waterproof seal for coaxial cable fittings and many other
connections. Use for TV and radio antennas, satellite dishes, CATV, wireless
networks, marine electronics, feed lines, radar and microwave installations, and
many other applications.
ASTM D5-52, gm load, 5 sec.=7.0/10.0 mm. Non-hardening, non-oxidizing at
ambient temperature.
Apply between 40° F. to 110° F.
Material is non-staining to paint; stays flexible and maintains a waterproof seal
over an extreme range of temperatures. Will not crack at -200° F, will not slump
1 hr. @350° F.
EQUIPMENT:
To Next Page
Loading...