36
8-1 Front wheel maintenance :
※Socket wrench #17 x 1pcs ※internal hexagonal wrench #8 x 1pcs
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Please keep the front wheel of the scooter suspending in midair.
3.Remove the nut cover of the rim outside
4.Remove the lock nut (M10) and the spacer.
5.Remove the front wheel.
※Now the tire can be replaced.
6.Remove the bearing (2pcs) and socket (1pcs).
7.Loosen the rim lock screw (M10 xP1.5 x 35L).
8.The rim can now be separated from the tire.
※The left/right front wheels can be disassembled in the same way.
※Please follow the above steps in reverse for reassembly and replacement.
8-2 Meter gear maintenance (right front wheel) :
※No tools required
1.Refer to 3-1 Powering off the battery to power off the scooter.
2.Refer to 8-1 Front wheel maintenance to remove the right front
wheel.
3.Loosen the meter gear wire.
4.Remove the motor gear set.
※Please follow the above steps in reverse for reassembly and
replacement.
※Standard front tire specifications :
※Tire pressure: 35-40 psi
※Tread pattern standard: 0.5 mm or more
※The front wheel left/right disassembly method is the same.
※If the tire has abnormalities such as yellowing/deformation / damage / air leakage / shallow
tread pattern, please replace with a new one.
※Scooter tires are consumables. It is recommended to check the tires daily before running,
in order to ensure safety.
※Avoid placing the scooter tires near a fire source, water source, or heat source to prevent
reducing the tire’s service life.
※Prevent scooter tires from coming in contact with chemicals and oil to prevent tire
deterioration.
3.
3.
6.
7.
8.
4.
5.
300+-30kgf-cm
4.
To Next Page
Loading...
Need help?
General
