CAB SQUIX - Printer Unpacking and Initial Setup

8 8
2 Installation
2.2 Unpacking and Setting-up the Printer
 Lift the label printer out of the box.
 Check label printer for damage which may have occurred during transport.
 Set up printer on a level surface.
 Remove foam transportation safeguards near the printhead.
 Check delivery for completeness.
Contents of delivery:
• Label printer
• Power cable
• USB cable
• WLAN stick
• Operator's Manual
• DVD with label software, Windows driver and documentation
i
Notice!
Please keep the original packaging in case the printer must be returned.
!
Attention!
The device and printing materials will be damaged by moisture and wetness.
 Set up label printers only in dry locations protected from splash water.
2.3 Installing the WLAN stick
1
2
3
4
Figure 5 Installing the WLAN stick
 Remove the cover (1) with the Allen key (2).
 Connect the WLAN stick (4) to the USB interface (3) in the control panel.