Calculated Industries MACHINIST CALC PRO User Manual

22 — Ma c h i n i s t ca l c ™ Pr o
RPM – Turning
Calculate the Spindle Speed (RPM) needed to turn a piece
with a 125 mm Diameter at a recommended Cutting Speed
of 200 smm:
KEYSTROKE DISPLAY
OO
0.
1. Enter the bit Diameter:
125d
DIA $ 125. MM
2. Enter the Cutting Speed:
200C
CUT $ 200. M/MIN
3. Calculate the Spindle Speed (RPM):
R
* RPM 509.
* Repeated presses of
R
will toggle through the inputs and outputs,
starting with the entered Cutting Speed.
RPM – Drilling
Calculate what the RPM (Spindle Speed) should be set to
when drilling into material with a recommended Cutting Speed
of 25 smm using a 17 mm bit:
KEYSTROKE DISPLAY
OO
0.
1. Enter the Diameter:
17d
DIA $ 17. MM
2. Enter the Cutting Speed:
25C
CUT $ 25. M/MIN
3. Calculate the RPM:
R
* RPM 468.
* Repeated presses of
R
will toggle through the inputs and outputs,
starting with the entered Cutting Speed.
UG4089E-A-inside.indd 22 6/9/2011 3:16:17 PM

Calculated Industries MACHINIST CALC PRO Specifications

General

Type	Scientific
Cover	Yes
Form factor	Pocket
Control type	Buttons
Product color	Black
Digits	12 digits
Display tilting	No
Display size (HxV)	15 x 65 mm
Display number of lines	- lines
Display size (HxV) (imperial)	0.625 x 2.5 \
Storage media type	-
Battery type	LR44
Power source	Battery
Battery voltage	1.5 V
Number of batteries supported	2

Weight and Dimensions

Depth	25 mm
Width	90 mm
Height	160 mm
Weight	170 g