Us e r 's GU i d e — 37
1. Enter the Thread Size:
1.6mt
SIZE 1.6
–
MM
2. Enter the Pitch and store the nal Thread Size:
.35t
THRED
SIZE
$
1.6
– 0.35
MM
3. Find the Ideal, Maximum and Minimum Wire Sizes:
gf
(Wire Size) IDEAL SIZE 0.2021
MM
f
MAX SIZE 0.3150
MM
f
MIN SIZE 0.1960
MM
3-Wire Measurement – Known Thread Size and Wire Size
You can nd the Minimum and Maximum 3-Wire Measurements
as well as the Pitch Diameters if you know the Thread Size and
the Wire Size you want to use.
Note: When solving for 3-Wire Measurements and Pitch Diameters,
the calculator assumes the equivalent External Thread Type if an
Internal Thread Type is set (i.e., Internal 6H is assumed External 6H
for Metric Threads).
Find the Minimum and Maximum allowable 3-Wire Measurements
and Pitch Diameters for a
M1.60 x 0.35,
Class 6H (External)
screw, using 0.10 mm wire:
KEYSTROKE DISPLAY
OO
0.
1. Enter the Thread Size:
1.6mt
SIZE 1.6
–
MM
2. Enter the Pitch and store the nal Thread Size:
.35t
THRED
SIZE
$
1.6 –
0.35
MM
3. Set the Thread Class to 6H:
6gb
* (Thread Class)
EXT MM 6H
* If necessary, continue pressing
b
until the desired External Thread
Class is displayed.
KEYSTROKE DISPLAY
(cont’d)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
