Calculated Industries MACHINIST CALC PRO - Miscellaneous Functions

Us e r 's GU i d e — 7
gF
Cosine (Cos) — Calculates the Cosine of an
entered degree or unitless value.
gp
Arccosine (Cos
-1
) — Calculates the angle for the
entered or calculated Cosine value.
gc
Tangent (Tan) — Calculates the Tangent of an
entered degree or unitless value.
gh
Arctangent (Tan
-1
) — Calculates the angle for the
entered or calculated Tangent value.
Miscellaneous Functions
g.
Degrees:Minutes:Seconds (dms◄►deg) —
Converts between D:M:S and decimal degree
formats; repeated presses will toggle between the
two formats.
%
Percentage — Used to nd a given percent
of a number.
g%
x
2
— Squares the value on the display.
A
Backspace Function — Used to delete entries one
keystroke at a time (unlike the
O
function, which
deletes the entire entry).
gA
Square Root (!) — Calculates the Square Root of
the number on the display.
g,
Reciprocal (1/x) — Finds the Reciprocal of a
number (e.g.,
8g,=
0.125).
g*
Clear All — Returns all stored values to the default
settings. Does not affect Preference Settings.
g-
Change Sign (+/–) — Toggle displayed value
between negative and positive value.
g+
Pi — Displays value of π (3.1415927).
(cont’d)
UG4089E-A-inside.indd 7 6/9/2011 3:16:16 PM