Calculated Industries MACHINIST CALC PRO - Page 57

Us e r 's GU i d e — 55
5) Volume
Answer
Format
– Standard: if units entered are the same –
e.g., Feet x Feet x Feet – the answer will remain
in this format (Cubic Feet), but if units entered
are different – e.g., Feet x Feet x Inches –
volume answer will be displayed in Cubic Feet.
– Cubic Feet: volume answers always
displayed in Cubic Feet, regardless of unit entry
– e.g., Inches x Inches x Inches = Cubic Feet.
– Cubic Meters: volume answers always
displayed in Cubic Meters, regardless of unit
entry – e.g., Feet x Feet x Feet = Cubic Meters.
– Cubic Inches: volume answers always
displayed in Cubic Inches, regardless of unit
entry – e.g., Feet x Feet x Feet = Cubic Inches.
6) Fractional
Mode
– Standard: fractions are displayed to the
nearest fraction.
– Constant: fractions are displayed in the set
Fractional Resolution.
7) Mathematical
Operation
– Order: the calculator uses the Order of
Operations Method (10 + 4 x 5 = 30).
– Chain: the calculator uses the Chaining
Method (as entered: 10 + 4 x 5 = 70).
PREFERENCE OPTIONS
UG4089E-A-inside.indd 55 6/9/2011 3:16:19 PM