Cambium Networks PTP 820C User Manual

Chapter 2: Getting Started
Enabling ACM with Adaptive Transmit Power
phn-3963_004v000
Page 2-28
Figure 23 Radio Parameters Page Per Carrier – PTP 820C
3. In the Adaptive TX power admin field, select Enable. The AdaptiveTX power operational status
field should now indicate Up to indicate that the feature is fully functional.

Cambium Networks PTP 820C Specifications

General

Category	Network Router
Management Interface	Web GUI, SNMP, CLI
Max Range	Up to 120 km
Ethernet Ports / Interfaces	2 x 10/100/1000 Mbps
Security	AES encryption
Operating Temperature	-40°C to +60°C
Ingress Protection	IP67
Frequency Bands	6, 7, 8, 10, 11, 13, 15, 18, 23, 26, 28, 32, 38, 42 GHz
Modulation	QPSK to 4096QAM