Keyword Information and Location
PakBusEncryptionKey
This setting specifies text that will be used to generate the key for
encrypting PakBus messages sent or received by this datalogger. If this
value is specified as an empty string, the datalogger will not use PakBus
encryption. If this value is specified as a non-empty string, however, the
datalogger will not respond to any PakBus message unless that message
has been encrypted.
l String data type
Where to find:
l Settings Editor tab in Device Configuration Utility: Datalogger |
PakBus Encryption Key
PakBusNodes Discontinued; aliased to CommsMemAlloc
PakBusPort
This setting specifies the TCP service port for PakBus communications
with the datalogger. Unless firewall issues exist, this setting probably
does not need to be changed from its default value. Default 6785.
l Numeric data type
Where to find:
l Settings Editor tab in Device Configuration Utility: Network
Services | PakBus/TCP Service Port
PakBusTCPClients
This setting specifies outgoing PakBus/TCP connections that the
datalogger should maintain. Up to four addresses can be specified.
l String data type
Where to find:
l Settings Editor tab in Device Configuration Utility: Network
Services | PakBus/TCP Client Connections
9. Tips and troubleshooting 151
To Next Page
Loading...
