Canon A1 - Removing the Extension Delivery Kit

Chapter 3
3-24
5) While freeing the hinge assembly [2], detach the
right door.
F-3-104
Attaching the Right Door
1) Match the hinge [1] found at the bottom of the right
door against the lug.
2) Engage the hinge [2] found on the top of the right
door with the hook found on the side plate.
F-3-105
When tightening the 2 screws used to fix the hinge in
place, be sure to close the right door first.
3.3.5.4 Removing the
Extension Delivery Kit
0007-6191
1) Free the harness [2] front the cable clamp [3], and
remove the 2 re-use bands [4].
2) Disconnect the connector [1] from the terminal of
the host machine.
F-3-106
3) Open the extension delivery kit [1].
4) Remove the 2 screws [3].
5) Remove the 2 screws [2], and close the extension
delivery kit.
F-3-107
6) Detach the extension delivery kit [1] from the host
machine.
F-3-108