Canon A1 - Way Unit Controller PCB; Removing the Inside Delivery Tray, Reversal Guide, and Inside Upper Cover; Removing the Right Cover (Rear); Removing the Right Door

Chapter 3
3-42
3) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the No. 3 delivery solenoid
[3].
F-3-188
3.4.9 3 Way Unit Controller PCB
3.4.9.1 Removing the Inside
Delivery Tray, Reversal
Guide, and Inside Upper
Cover
0007-6320
1) Remove the inside delivery tray [1].
2) Remove the reversing guide [2].
3) Remove the screw [3], and detach the inside upper
cover [4].
F-3-189
3.4.9.2 Removing the Right
Cover (rear)
0007-6321
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
F-3-190
3.4.9.3 Removing the Right
Door
0007-9334
1) Open the right door.
F-3-191
[1]
[2]
[3]
[3]
[3]
[4]