Canon DC10 - Displaying Additional Recording Data

45
Basic Functions Playback
E
Displaying Additional Recording Data
The camcorder keeps a data code containing the recording date and time and other
camera data such as shutter speed and exposure (f-stop). You can select the data to be
displayed when playing back a movie ( ) or viewing a still image ( ).
Selecting the Date/Time Display Combination
1. Press the MENU button.
2. Use the omni selector ( ) to select the [DISPLAY SETUP] menu and
press ( ).
3. Use the omni selector ( ) to select the [DATA CODE] option and
press ( ).
4. Use the omni selector ( ) to select the data combination desired and
press ( ) to select it.
In mode you can only choose to display the recording date, the time or
both.
5. Press the MENU button to save the setting and close the menu.
6. While playing back a movie or viewing a still image, press the
DISPLAY button to turn on the data code display.
Repeatedly pressing the DISPLAY button will turn the on-screen displays on and off in
the following sequence:
MENU
(79)
DISPLAY SETUP DATA CODE
DISPLAY button
Omni Selector
MENU button
on-screen displays on
data code display on
on-screen displays off