Canon DC10 - Erasing Still Images; Erasing Single Image (Single and After Recording)

94
Erasing Still Images
You can erase still images recorded on the memory card or on the disc (DVD-RW only),
one at a time or all at once.
Be careful when erasing images. Erased images cannot be recovered.
Protected images on the memory card and images on a protected disc cannot be
erased.
Erasing a Single Image
Still images recorded on the disc: This option is only available with DVD-RW discs
recorded in VR mode.
1. Set the camcorder to view still images ( ).
2. Press the FUNC. button.
3. First, select ( ) the [ IMAGE ERASE] symbol and press ( ).
4. Select ( ) the [ERASE] option and press ( ) to erase the still
image.
5. Press the FUNC. button to close the menu.
Erasing a Single Image After Recording
You can erase the still image you recorded last while you are reviewing it immediately
after recording it. Still images on the disc: This option is only available with DVD-RW discs
(VIDEO or VR mode).
1. While reviewing the image immediately after recording it press the
FUNC. button.
2. First, select ( ) the [ IMAGE ERASE] symbol and press ( ).
3. Select ( ) the [ERASE] option and press ( ) to erase the still
image.
4. Press the FUNC. button to close the menu.
(59)
IMAGE ERASE
(59)
IMAGE ERASE