Canon iPF710 - Page 230

Chapter 8
8-4
03130031-2F25 Unable to detect CR motor HP
03130031-2F26 Carriage cannot operate
03130031-2F27 Carriage movement timeout
03130031-2F2A Feed roller HP sensor error
03130031-2F2D Pump error
03130031-2F2E Roll movement timeout
03130031-2F32 Multi sensor faulty
03130031-2F3A Valve motor error
03130031-4027 Lift movement time-out
03800200-2802 Incorrect printhead was installed
03800200-2811 Difference of version of print head
03800300-2801 Unable to correct printhead DI
03800400-2803 Printhead EEPROM error
03800500-280C Many nozzle on printhead did not inject ink
03800500-2F2F No ink ejection detection error
03800500-2F30 No ink ejection detection position adjustment error
03810101-2501 No ink (Y)
03810102-2502 No ink (M)
03810103-2503 No ink (C)
03810104-2500 No ink (BK)
03810106-2506 No ink (MBK)
03810106-2507 No ink (MBK2)
03810201-2581 Remaining ink low (Y)
03810201-2591 Remaining ink low (Y)
03810202-2582 Remaining ink low (M)
03810202-2592 Remaining ink low (M)
03810203-2583 Remaining ink low (C)
03810203-2593 Remaining ink low (C)
03810204-2580 Remaining ink low (BK)
03810204-2590 Remaining ink low (BK)
03810206-2586 Remaining ink low (MBK)
03810206-2587 Remaining ink low (MBK2)
03810206-2596 Remaining ink low (MBK)
03810206-2597 Remaining ink low (MBK2)
03830101-2521 Ink tank not installed (Y)
03830102-2522 Ink tank not installed (M)
03830103-2523 Ink tank not installed (C)
03830104-2520 Ink tank not installed (BK)
03830106-2526 Ink tank not Installed (MBK)
03830106-2527 Ink tank not installed (MBK2)
03830201-2541 Ink tank ID error (Y)
Code* Description