Chapter 8
8-5
03830202-2542 Ink tank ID error (M)
03830203-2543 Ink tank ID error (C)
03830204-2540 Ink tank ID error (BK)
03830206-2546 Ink tank ID error (MBK)
03830206-2547 Ink tank ID error (MBK2)
03830301-2561 Ink tank EEPROM error (Y)
03830302-2562 Ink tank EEPROM error (M)
03830303-2563 Ink tank EEPROM error (C)
03830303-2572 Remaining ink low (M)
03830304-2560 Ink tank EEPROM error (BK)
03830304-2570 Remaining ink low (BK)
03830306-2566 Ink tank EEPROM error (MBK)
03830306-2567 Ink tank EEPROM error (MBK2)
03830306-2576 Remaining ink low (MBK)
03830306-2577 Remaining ink low (MBK2)
03830312-2571 Remaining ink low (Y)
03830313-2573 Remaining ink low (C)
03841001-2819 Maintenance cartridge tank full
03841001-281B Empty capacity of the maintenance cartridge when cleaning it various is insufficient.
03841101-2818 Maintenance cartridge not installed
03841201-2816 Maintenance cartridge EEPROM error
03841201-2817 Maintenance cartridge ID error
03860002-2E02 The cut sheet is not set though the data of the cut sheet specification was received.
03860002-2E0A Manually fed cut sheet was already loaded even though received data indicated roll
media
03860002-2E0C When the roll paper was loaded, the data of the cut sheet specification was received.
03861001-2405 The form set position is unsuitable to the print of edge none.
03861001-2406 Data is unsuitable to the print of edge none.
03862000-2E09 Roll paper running out
03870001-2015 Cutting failure
03900001-4042 MIT data transfer failure
03900001-4049 Forwarding ROM data machine kind difference
E194-4034 Sensor calibration error(not generated in the use mode.)
Code* Description
To Next Page
Loading...
