•
Using Favorites (Mac OS) âž” P.252
Cutting Roll Paper After Printing
Cutting Roll Paper After Printing
Roll paper can be automatically cut after printing.
Note
• It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper that
cannot be used with the auto cut feature, see the Paper Reference Guide. (See "Types of Paper.") ➔P.326
•
Automatic Cutting
Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, or
you can print a cut line.
For instructions on cutting roll paper after printing, refer to the following topics, as appropriate for your comput-
er and operating system.
•
Cutting Roll Paper After Printing (Windows) âž” P.133
•
Cutting Roll Paper After Printing (Mac OS) âž” P.134
Cutting Roll Paper After Printing (Windows)
Cutting Roll Paper After Printing (Windows)
This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to
print a cut line for manual cutting.
Note
• The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps
below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead.
1
Choose Print in the application menu.
2
Select the printer in the dialog box, and then display the printer driver dialog box. (See "Accessing the Print-
er Driver Dialog Box from Applications .") âž” P.144
3
Click the Page Setup tab to display the Page Setup
sheet.
4
Select and click a roll paper in the LPaper Source list.
5
Click NRoll Paper Options to display the Roll Paper Op-
tions dialog box.
iPF8400SE
Cutting Roll Paper After Printing
User's Guide
Enhanced Printing Options Other useful settings
133
To Next Page
Loading...
Need help?
General