Format Dialog Box
Format Dialog Box
This dialog box appears when you select Format from the Object menu after you select an object. You can rotate,
enlarge, or reduce an object.
Note
• When the objects are not selected, you can not select Format.
•
Rotate
When you place a checkmark here, you can select Rotate Right or Rotate Left.
Setting Details
Rotate Right Rotates the object 90 degrees clockwise.
Rotate Left Rotates the object 90 degrees counterclockwise.
Note
• When several objects are selected, you cannot select Rotate.
•
Scaling
You can input the value for enlargement or reduction of the obeject in numerical characters.
Note
• You can input between 25 and 400.
• You can change the numbers by clicking either ▲ button or ▼ button.
•
Object Size
You can confirm the object size.
Note
• When several objects are selected, you cannot display Object Size.
Laying out a Multiple-File Document on One Page
Laying out a Multiple-File Document on One Page
You can lay out and print a multiple-file document on one page.
1
From the application software's File menu, select the printer setup menu to open the Print dialog box.
Note
• Normally, select Print from the File menu.
2
Click on Free Layout in the Page Setup panel to attach a checkmark.
3
In the Print dialog box, select the pages to print and the number of copies, and click the Print button.
Free Layout starts, laying out the document created with application software in the layout area as an ob-
ject.
iPF8400SE
Format Dialog Box
User's Guide
Mac OS Software Free Layout
303
To Next Page
Loading...
Need help?
General