Installation Procedures
Installation Procedures
The Media Configuration Tool installation screen appears when you start the installation of a new version of the
Media Configuration Tool. The installation procedure started from this screen is described below.
Important
• If the printer driver is installed from the User Software CD-ROM, the Media Configuration Tool is also installed
and the media information is also configured. Therefore, the following procedure does not normally need to be
performed. To install the Media Configuration Tool without using the User Software CD-ROM, such as when you
have downloaded a new version of the Media Configuration Tool from the Canon website, use the following pro-
cedure.
• You must be logged in as Administrator when installing software in Windows.
1
Start the Media Configuration Tool installer.
Click the Next button.
2
The next screen presents selections for the country or
area where the printer is used.
Select a country or territory then click the Next button.
3
The License Agreement is displayed.
If you accept the agreement, click Yes.
iPF8400SE
Installation Procedures
User's Guide
Handling and Use of Paper Media Configuration Tool (Windows)
371
To Next Page
Loading...
Need help?
General