7
In the Paper Size Options dialog box, select the Oversize check box in Display Series.
8
Click OK to close the Paper Size Options dialog box.
9
Click Oversize - ISO A4 in the APage Size list.
10
Select and click a roll paper in the LPaper Source list.
11
Select the width of the loaded roll in the MRoll Paper Width list—in this case, ISO A2/A3 Roll
(420.0mm).
12
Confirm the print settings and print as desired.
Note
• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.141
Printing at Full Size (Mac OS)
Printing at Full Size (Mac OS)
This topic describes how to print at full size based on the following example. (Oversized Printing)
•
Document: Any Type
•
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
•
Paper: Roll paper
•
Paper type: Plain Paper
•
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
1
This sets the BFormat for and C Paper Size.
Note
•
The configuration method varies depending on the
OS and application software you are using.
If Page Setup is displayed in the application menu,
the settings are configured by opening the Page At-
tributes dialog box from Page Setup.
If it is not displayed, the settings are configured in the
upper part of the printer driver displayed when you se-
lect Print from the application software menu.
2
Select the printer in the APrinter list.
3
In FPaper Size, click the size of the original. In this case, click ISO A4 - Oversize.
4
If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and
then select Print from the application software menu.
iPF8400SE
Printing at Full Size (Mac OS)
User's Guide
Enhanced Printing Options Printing at full size
63
To Next Page
Loading...
