4
Click Print Selected Area.
Important
• If only one cell is selected, Print Selected Area cannot be selected.
A message will appear informing you that analysis is
in progress.
The Layout menu will appear automatically.
Important
• If the range selected in Excel 2007 or later is too large, it will not be possible to analyze the data. Select
a smaller range and then run the analysis.
Note
• If data analysis requires time, a message dialog will appear. If you select No, you will return to the appli-
cation.
5
Select Roll Paper Width that is set in the printer.
6
Select image size.
7
Select layout.
8
To configure Binding, click the Binding Settings button.
Refer to "Configuring Binding (Excel)" âž” P.243 for details on the procedure for configuring Binding.
Print Selected Area(Excel)
iPF8400SE
User's Guide
Windows Software Print Plug-In for Office
242
To Next Page
Loading...
Need help?
General