4
Open the Top Cover and check the position where
paper is loaded.
To start printing from the current position, close the
Top Cover.
To reposition the paper, lift the Release Lever.
5
Keeping the right edge of the paper aligned with the extended
line of the paper alignment line (a) on the right side of the printer
and the position from which to start printing aligned with the
groove (b) at the far end of the platen, load the paper.
Printing From a Desired Starting Point
iPF8400SE
User's Guide
Handling and Use of Paper Handling sheets
364
To Next Page
Loading...
Need help?
General