4
Press â–² or â–¼ to select AppleTalk, and then press the OK button.
5
Press â–² or â–¼ to select On, and then press the OK button.
6
Press the Menu button.
If you have changed any settings, a confirmation mes-
sage is displayed. In this case, press the OK button.
Important
• Be sure to complete step 6. This will activate the values you have entered.
Note
• By using RemoteUI, you can also specify the object name used for AppleTalk, as well as the printer zone name.
For details on RemoteUI, see "Using RemoteUI." âž” P.475
Configuring the Destination (Mac OS)
Important
• AppleTalk is supported in Mac OS X 10.2.8–10.4.
Note
• The following procedures are based on Mac OS X 10.4. The method of configuring the destination varies depend-
ing on the version of Mac OS.
• The imagePROGRAF printer driver is not compatible with AppleTalk.
1
In System Preferences, click Network to display the Network window.
2
In Show, choose Built-in Ethernet. Next, click Ap-
pleTalk, select Make AppleTalk Active, and click
Apply now.
3
Close the Network window and save the settings.
iPF8400SE
Configuring the Destination for AppleTalk Networks
User's Guide
Network Setting Mac OS Settings
493
To Next Page
Loading...
Need help?
General