8
Press the Power button and turn off the printer.
Pack the printer
1
Disconnect the power cord and interface cable.
Important
• Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.
2
Open the Top Cover and lift the Ejection Guide.
3
Remove the four ejection supports and lower the
Ejection Guide.
Preparing to Transfer the Printer
iPF8400SE
User's Guide
Maintenance and Consumables Other Maintenance
572
To Next Page
Loading...
