3
Connect the power cord to the Power Supply Connector
on the back of the printer.
4
Plug the power cord into the outlet.
5
Press the power button to turn the printer on.
6
Open the Ink Tank Cover and install the ink tanks.
7
Install the software.
Note that the driver installation procedure varies depend-
ing on the type of connection.
Important
• When the printer is connected to a network (via TCP/IP), the printer's IP address may be changed if you
reinstall the printer.
In this case, be sure to reconfigure the printer's IP address.
Reinstalling the Printer
iPF8400SE
User's Guide
Maintenance and Consumables Other Maintenance
576
To Next Page
Loading...
Need help?
General