5-27
Printing Environment Settings
5
SETUP Menu Settings
•
When printing from the multi-purpose tray
If ON is specified, the printer prints on the upper side of the loaded paper.
If OFF is specified, the printer prints on the underside of the loaded paper.
Specify OFF for this item when you want to match the setting of the orientation or
printing side for the last page with those for its previous page, such as when you
want to print previously printed paper etc. whose printing orientation or printing
side is fixed.
NOTE
The setting is effective only when 2-SIDED PRINT. is set to ON.
QUALITY MENU Options
IMGE REFINEMENT
ON*, OFF
Specifies whether the printer should use Image Refinement that enables to print
jagged outlines of text or graphics smoothly.
If ON is specified, the printer prints using Image Refinement.
If OFF is specified, the printer prints without using Image Refinement.
NOTE
•
The effect of Image Refinement varies depending on the pattern of text or graphics
(diagrams, charts, graphs, etc).
•
If GRADATION LEVEL (See the next item) is set to HIGH, the setting for this item is
ignored, and the printer prints in the same way as when OFF is specified.
GRADATION LEVEL
STANDARD*, HIGH
Specifies the gradation level for data.
STANDARD is suitable to print thin lines or data of low resolution.
HIGH is suitable to print data of high resolution with complex gradations, such as
photographs and graded images. You print data more clearly than when
STANDARD is specified.
NOTE
If this item is set to HIGH, the setting for IMGE REFINEMENT (See the previous
item) is ignored even if ON is specified for it, and the printer prints in the same way
as when OFF is specified.
To Next Page
Loading...
