2-5. Warnings
Warning Message on the LCD Solution
Low ink "!" is indicated for an applicable ink tank icon in
the Status Monitor.
No special solution.
Since the ink will be used up soon, prepare for a
new ink tank.
Print head temperature
rise
If the print head temperature does not fall, the
print head error will occur.
When the print head temperature falls, the error is
automatically cleared.
If the print head error is indicated, repair servicing
is required.
Protection of excess rise
of the print head
temperature
If the print head temperature does not fall, the
print head error will occur.
If the print head temperature exceeds the specified
limit, an intermission is inserted during printing.
Restrictions on paper The current paper cannot be set. Change the size
and type.
Re-select the supported paper type and size.
USB cable not
connected
Set the PC to start scan. Connect the USB cable, then turn on the computer.
Cancellation of image
select information
Reset the selected photo information?
Yes No
- Select
Yes
, and press the OK button.
=> The image selection is cancelled, and the
menu or sub-menu is displayed.
- Select
No
, and press the OK button.
=> The LCD returns to the display
immediately before the message was
displayed.
Do you want to clear the image scanned from the
photo?
Yes No
Do you want to clear the scanned image and
rescan?
Yes No
To Next Page
Loading...
