2-4. Other Error Messages
Message on the LCD Cause Solution
The selected paper cannot be fed from
front tray. Change the paper source and
press [OK].
The paper type being used is not supported for
paper feeding from the front tray.
Change the paper source to the rear tray.
Borderless print is not available for
paper from front tray. Change the paper
source and press [OK].
Borderless print is attempted when the front
tray is selected as the paper source.
Change the paper source to the rear tray.
Change the setting(s). Settings made conflict each other. (e.g.
Selecting borderless printing on plain paper)
Change the settings so that they will not
conflict each other.
Device memory is full. Reduce the
number of documents (photos, etc.)
to scan or copy.
The memory is not sufficient to do the print job
in copying.
Reduce the amount of data to be printed, or
print from a computer.
Failed to scan. Either document cannot
e scanned or is not placed on the platen
glass.
The machine failed in scanning the document
for Fit-to-page copy, or photos or films were
not recognized in pre-scanning.
Press the OK button to clear the error.
Press <>.
(<>: Color button icon)
The Black button was pressed, but it is invalid. A temporary error. Press the Color button to
continue the operation.
Press <>.
(<>: Black button icon)
The Color button was pressed, but it is invalid. A temporary error. Press the Black button to
continue the operation.
There are no photos in memory card. Supported image files are not in the memory
card.
A temporary error.
- Confirm that supported image files are in the
memory card.
- Images with double-byte characters used in
the file name (or folder name) may not be
recognized. Change the file (or folder) name
so that it contains only single-byte
alphanumeric characters.
- If images are edited on the computer, print
them from the computer.
The value exceeds the number of copies
you can print.
During selecting images or specifying the
number of copies, the total print quantity
exceeds the prescribed value of 999.
A temporary error. The last operation before
the error is cancelled, and the total print
quantity returns to the value before the error.
Memory card is not set. Insert the card
after checking the direction.
The memory card is not inserted in the slot
properly.
Set a memory card.
DPOF information is not saved in the
memory card.
DPOF print was selected in the menu, but no
DPOF files are contained in the memory card.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
The number of copies to print is not set.
Input the number of copies.
Printing was attempted without specifying the
print quantity (with the print quantity left
"0" (zero)).
A temporary error. Specify the print quantity.
This layout is available only for A4 or
8.5"x11"(215x279).
In Layout print, "Mixed 1, 2, or 3" which is
available only with A4 or Letter size paper is
selected, but the paper size is not set to A4 or
Letter.
A temporary error. The LCD automatically
returns to the display before the error
occurrence.
Change the setting after removing the
card.
With a memory card inserted in the slot,
change of the Read/Write attribute was
attempted.
A temporary error. Remove the memory card,
then change the Read/Write attribute.
The card is currently write-enabled. Set
to read-only mode before performing
operation.
With the memory card set to the Read/write
mode, Card Direct printing operation was
attempted from the menu.
A temporary error. Remove the memory card,
change the memory card setting to Read-only,
then perform Card Direct printing.
The paper size is not correct. Check the
page size you have set.
Non-supported size of paper for Camera Direct
printing via PictBridge connection is selected.
Cancel printing on the digital camera. Confirm
the paper size, and print again.
To Next Page
Loading...
