Setting Settings values Settings values Function
[Image] [Color highlight-
ing]
[On]
[Off]
When enabled, all colored information is
printed darker on the original than black/
gray information. For instance, marked or
highlighted text becomes more visible.
NOTE
It is only relevant for the copy
modes: [Colored original],
[Lines/text standard], [Lines/text
draft], [Folded lines/text], [Dark
original].
[Lighter/Darker] Value from -5 to 5 Define the lightness and the contrast of a
scan. Increase the value for making a
lighter copy, and decrease the value for a
darker copy.
When you make a copy darker, the infor-
mation becomes darker while the back-
ground is less affected. When you make a
copy lighter, weak information is not clip-
ped to white.
[Mirror] [On]
[Off]
[When “on”, the image is mirrored along
the vertical axis (the media transport di-
rection). ]
[Stamp] Select a stamp
from the list.
NOTE
For more
informa-
tion on
how to
create a
stamp, see
Create a
stamp
on
page 96
Copy with a stamp
4
Advanced settings for copy jobs
180
Chapter 4 - Use the Printing System
To Next Page
Loading...
