5-13
List of Log Messages
Appendix
B011 Audio client connected [info]
B012 Audio client closed [info]
B101 Error request received [notice]
B102 Client connection denied [notice]
Description [%1] %2 connected n=%3 (B011)
%1 Client type (send | recv)
%2 Client host IP address
%3 Total number of clients
Meaning An audio client was connected.
Description [%1] %2 closed [%3] (B012)
%1 Client type (send | recv)
%2 Client host IP address
%3 Disconnection type (active | passive | sender)
Meaning An audio client was disconnected.
Description %1 unusual request[%2] (B101)
%1 Client host IP address
%2 Error type (400 | 404 | ...)
Meaning
The request was denied due to a command error (400) or parameter
error (404).
Description %1 request denied[%2] (B102)
%1 Client host IP address
%2 Denial type (41 | 43 | ...)
Meaning
Client connection was denied due to an authentication error (41),
insufficient resource (43), specification of unsupported codec (45),
specification of unsupported stream (46), host access restriction
(48), too many clients (49) or invalid operation mode (4a).
Countermeasure
41: Check the user name, password or user list used for connection,
43: Reconnect or reboot the camera, 45 or 46: Use supported client
software, 48: Check the host lists, 49: Check the maximum number of
clients that can be connected, 4a: Check the applicable settings to
see if the audio server is used.
To Next Page
Loading...
