5-14
List of Log Messages
B103 Client forcibly disconnected [notice]
B301 Audio sending device error [err]
B401 Audio device initialization failed [crit]
B402 Audio server initialization failed [crit]
Description %1 access denied[%2] (B103)
%1 Client host IP address
%2 Denial type (41 | 48 | 4a)
Meaning
Connection was initially permitted, but the setting has subsequently
been changed to prohibit access, thereby triggering a forced
disconnection (the denial type is the same with B102).
Description cannot use audio device for tx[%1:%2] (B301)
%1 Error handling (ld | buff)
%2 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically, arrange for servicing.
Description audio device initialization error[%1] (B401)
%1 Error number
Meaning The audio device could not be initialized. The audio server stops.
Countermeasure
If the problem persists after rebooting, the camera is faulty. Arrange
for servicing.
Description wvaudio initialization error[%1] (B402)
%1 Error number
Meaning The audio server could not be initialized. The audio server stops.
Countermeasure
If the problem persists after rebooting, the camera is faulty. Arrange
for servicing.
To Next Page
Loading...
