3-10
Input/Output Terminals
Note
Switch the LINE IN/MIC IN setting on the Setting page according to the microphone
specification. See "Audio Input" ( Operation Guide).
If a wrong input is used, the camera or microphone may be damaged. Be sure to set the
correct input.
The volume, sound quality, etc., may change depending on the characteristics of the
microphone used.
To send audio to speaker, use RM-Lite Viewer. Audio cannot be sent from VB-C500 Viewer
( P. 1-9).
Video and audio may sometimes lose synchronism.
Audio may be interrupted depending on the performance of the PC used or the network
environment.
Video and audio can be transmitted to a maximum of 30 clients. If there are too many
clients, audio may be interrupted.
If anti-virus software is used, audio may be interrupted.
Disconnecting/connecting the LAN cable interrupts the audio. Accordingly, reconnect the
LAN connection on the viewer side.
To Next Page
Loading...
