3-20
How to Operate VB-C60 Viewer
Saving the Paused Image
How to Operate
* Although the sample screen is that of Admin Viewer, you can also save the image in VB Viewer
using the same operation.
Reconnecting
This function is used to connect to the camera again.
To reconnect the camera, click this button.
Tip
When the control is paused, the display size setting, Pause/Resume button, Control for Admin
button and all functions of Control for Admin excluding the following items are grayed out.
• External input status display
• Motion detection status display
These functions are enabled again once the control is resumed.
Tip
Once the camera is reconnected, audio reception will stop.
The control privileges will be abandoned and the video capture size and video display size
will also return to the defaults.
1. Click the "Pause/Resume" button to
pause video.
2. Bring the cursor over the video
screen and right-click the mouse to
display the pop-up menu.
3. Select [Save Picture As].
4. Enter a file name and save the
image.
To Next Page
Loading...
