Living
42
2999828 - 05/18 - EHG-0012-00EN
6
6.6 Tables
6.6.1 Suspension table with separable support leg
The maximum permissible load on the swung-out table-top extension is
3 kg.
Fig. 23 Suspension table with sep-
arable support leg
The suspension table size can be enlarged by swinging out a table top ex-
tension.
Pull the knob (Fig. 23,2) of the lock down and swing out the table top ex-
tension (Fig. 23,1).
Swing the table top extension (Fig. 23,1) under the table top (Fig. 23,6)
until the lock latches in place audibly.
The suspension table's separable support leg enables it to be used as a bed
foundation.
Lift the front of the table top (Fig. 23,6) by approx. 45°.
Pull out the lower part of the support leg (Fig. 23,4) down and lay aside.
Remove the table top from the upper retainer.
Hook the table top at a 45° angle to the supports into the lower retainer
(Fig. 23,3) and place on the floor with the upper part of the support leg
(Fig. 23,5).
Extending:
Reducing size:
Conversion to bed
foundation:
To Next Page
Loading...
Need help?
General