212/212X Installation & Technical
8200-M639-O1 Rev D 09/14
Accumulator Statistics for Stored IDs:
You can access the accumulator statistics (A-STAT) menu by
pressing F key followed by the RECALL key while the indicator is
displaying weight.
If no ID's have yet been stored in memory, the indicator will
display “NO IDS” then display weight.
Pressing the RECALL key will step through 3 other headings:
TOT. WT – Sum of all accumulators stored in memory
ID files.
TOT.CNT – Sum of all count values stored in memory
ID files.
AVG.TOT – Average Total = TOT.WT / TOT.CNT.
Pressing the ENTER key while any of these headings are
displayed will display that value.
Pressing the ENTER key again will step to the next heading.
Pressing PRINT at any time while in the A-STAT menu will print
these stat values.
Pressing at any time while in the A-STAT menu will exit and
display weight.
Pressing CLEAR at any time while in the A-STAT menu will
prompt the user CLRALL.
If the user answers YES, all memory file accumulators and
counters will be cleared.
NOTE: ID's and Presets are NOT cleared from memory.
If the user answers NO, the indicator will return to the
previous A-STAT screen shown.
To Next Page
Loading...
Need help?
General
