1
SPECIFICATIONS
Power Requirements: 115 VAC 60 Hz (optional 230 VAC 50/60 Hz) powering a 12 VDC 300
mA wall plug-in UL/CSA listed power supply for the Desktop enclosure.
115 VAC 60 Hz (optional 230 VAC 50/60 Hz) at 0.1A for the NEMA 4X
enclosure.
Battery Operation: 12 VDC input jack for operation from an external battery
12 volt, 1.6 Ah for 8 hours operation
Enclosure Size: Desktop: 8.65" W x 6.5" H x 3" D
NEMA 4X: 9.8" W x 7.3" H x 3.2" D
Operating Temperature: 14° to 104° F or -10° to +40° C
Display: 5-digit, 0.6" high, 7-segment red LED
Sensitivity: 0.7uV/graduation (0-3.3 mV/V), Class III
Signal Input Range: 1.0mV min. to 50 mV max.
Transducer Excitation: 8.0 VDC
Number of Load Cells: 8 each, 350 OHM minimum load cells
Load Cell Cable Length: 150' max.; 30' max w/o sense lines
Resolution: 1 part in 20,000 displayed - 1 part in 80,000 internal
Capacities: 1,000 to 10,000 divisions commercial
Up to 99,999 divisions noncommercial
Graduation Value: 1, 2 or 5 x 1, 0.1, 0.01 or 0.001
Sample Rate: 1 to 12 samples per second selectable
Auto Zero Range: 0.5 or 1 through 9 graduations
Weighing Units: Pounds, kilograms, ounces, grams or pounds/kilograms
Keyboard: Membrane type with 21 keys
STANDARD FEATURES:
• Keyboard or Push Button Tare
• Gross, Tare, Net Conversion
• Metric Conversion
• Bi-directional Serial Interface
• Dual Preset Weight Comparator or Checkweigher with Outputs
• Auto Shut-Off Feature
• Selectable Sleep Mode
• Selectable Filtering
• Selectable Automatic Power On
OPTIONAL FEATURES:
• NEMA 4X Enclosure
• External Relay Box for Preset Weight Comparators
or Checkweigher (desktop only)
• Internal Relay Board for Preset Weight Comparators
or Checkweigher (NEMA 4X only)
INSTALLATION
The Model 708 Weight Indicating Instrument is available in either a stainless steel desktop
enclosure or a stainless steel NEMA 4X wall-mount enclosure. Determine which enclosure version
you have and refer to the appropriate section for installation and interconnection.
To Next Page
Loading...
