4.14
Insert the brush into the Espresso unit and
remove the residues.
Rinse the Espresso unit thoroughly using
hot water and manually rotate the gears.
ATTENTION
Make sure the components are perfectly
dry before installing them again on the ma-
chine, to prevent bacteria growth.
NOTE
Assemble the Espresso unit by proceed-
ing in the reverse order compared to the
above instructions.
Check:
● The gears are aligned properly.
● The unit is inside its seat and all com-
ponents are tight enough.
● The hydraulic circuit hoses are con-
nected properly.
● The lower safety block was moved to
the right in rest position.
To Next Page
Loading...
