4.37
4.11 DESCALING OF THE BOILER AND THE THERMOBLOCK
4.11.1 Descaling of the machine version with tank
4.11.2 Descaling of the machine version water connection
1. Remove the water tank.
2. Fill the tank with the descaling agent and re-position it into the machine.
3. Carry out some dispensing cycles of the water + descaling agent solution (through the
water or soluble output.
4. Remove the water tank and empty it.
5. Clean the tank thoroughly and ll it with drinking water.
6. Insert the tank into the machine and drained completely for cleaning the hydraulic cir-
cuit.
THE PROCEDURE IS CURRENTLY BEING DEFINED
THE PROCEDURE IS CURRENTLY BEING DEFINED
THE PROCEDURE IS CURRENTLY BEING DEFINED
NOTE
In presence of the centralised lter, the descaling procedure of the machine can be avoid-
ed.