4.28
NOTE
Assemble the Milker.
See the relevant paragraph.
ATTENTION
Make sure the components are perfectly
dry before installing them again on the ma-
chine, to prevent bacteria growth.
Required tools:
● Brush (CARIMALI 95.01806)
● Hot water
● Cleaning agent
NOTE
The components can be put also in the
dishwasher.
Brush the Milker dispensing nozzle with the
brush to remove the residues.
Immerse all components in a solution of hot
water and cleaning agent CARIMALI.
Rinse all components with hot water.
To Next Page
Loading...
