SHANDONG CARTER HEAVY INDUSTRY MACHINERY CO., LTD.
23
(c) The bucket and other tools are lowered to the ground.
(d) The throttle control knob gear down to 1st gear.
(e) In the low-speed no-load operation of the engine 5 minutes,
allowing the engine to cool.
(f) Stop the engine, remove the key from the key switch.
(g) Before flameout, the safety lever should be turned to the
vertical direction to prevent the safety accident caused by
misoperation.
If you attempt to climb or block mobile machines, it is possible the occurrence of serious injury or death.
7.Prevent reversing and rotary injuries
In order to prevent reverse rotation of an accident:
(a) Before reversing and rotary look around,recognized no one
around the machine.
(b) Keep walking alarm device (option) in working condition.
(c) Always be alert if anybody into the work area, before moving
the machine ,warning others horn or other signal.
(d) In reverse, if your vision is blocked, to arrange the signalman
Command, and to always keep the signalman in the field of vision.
(e) In the working condition of need signalman ,using the local
regulations potential signal.
(f) Only if the signal and operators, who clearly understand the
signal,and then move the machine.
(g) Understand all the meaning of banner used in the work, signals
and marked, and confirm who fat signal.
(h) Remain intact windows, mirrors and lights is clean and
undamaged.
To Next Page
Loading...