SyStem Operating infOrmatiOnSyStem Operating infOrmatiOn
4327 • X5 04/2015 47
PRIOR TO STARTING THE GENERATOR
Read, understand, and follow the Original Equipment Manufacturer (OEM) information that describes the generator.
1. Turn the generator OFF.
2. Shut off the generator circuit breaker located on the AC control center.
3. Close the generator cooling system seacock. The seacock is located below the engine room access hatch in the
cockpit.
Air
Conditioning
Seacock
Generator
Seacock
4. Remove and clean the strainer. The strainer is located next to the PORT engine.
Generator Strainer
To Next Page
Loading...