Carver C43 - Shore Water

SyStem Operating infOrmatiOnSyStem Operating infOrmatiOn
4327 • X5 04/2015 67
USING THE FRESHWATER WASHDOWNS
1. Attach one end of an appropriately sized nylon water hose to the tting of choice.
2. Attach a nozzle to the other end of the hose.
3. Open the faucet at the base of the hose tting to supply water to the hose.
shore water
The shore water tting enables the freshwater system to draw water from a land water source while the yacht is docked.
Shore water is not drawn from the onboard tank.
The deck plate labeled WATER is the only way to ll the freshwater tank. Connecting to shore water bypasses the onboard
freshwater tank and pressure water pump; water does not ll into the tank.
When connecting to shore water, switch OFF the FRESHWATER PUMP circuit breaker, located on the DC control center.
NOTICE: Never leave the yacht unattended while connected to shore water. Water may develop onboard if a water line
leaks.