CAS CI-100A - 4.2 CONFIG Submenu (Continued)

CI-100A Indicator Operation & Service Manual
────────────────────────────────────────────────────────
CAS-USA Corporation
www.cas-usa.com 11
SAZSM 0-100 2
Zero key range: 0=no limitation, 1-100=
(initial zero point) ±1%FS - (initial zero
point) ±100%FS, if (REGULAR)≠none, the
max is 2
AZSM 0-100 8
Zero tracking window:
0=0d, no tracking;
1-100=±(0.2+0.05*(1-100))d /s, if
(REGULAR)≠none, the max is 10
FILTER
FLT1.TH 0-255 40
Enter digital filter1 threshold: 0=no filter1;
1-254=filter1 be used only when vibration in
±0.5d*(1-254) ; 255= filter1 be always
used
FLT1.ST 1-64 8
Digital filter1 intensity: 1-64 ADC’s
data will be averaged
FLT2.TH 0-255 8
Enter digital filter2 threshold: 0=no filter2;
1-254=filter2 be used only when vibration in
±0.5d*(1-254) ; 255= filter2 be always
used
FLT2.ST 0-255 240
Digital filter2 intensity: 0-255=weak to
strong
FUNC HOLD
YES
YES
Yes/No=enable/disable hold function;
Operation refer to section8. In trade
application HOLD function should be
prohibited
NO
COUNT
YES
YES
Yes/No=enable/disable counting function,
Operations refer to section6.
NO
PERCNT
NO
NO
Percent weighing function is enable or
disable: (1)NO=disable; (2)100%=enable
and display format is 100% ;
(3)100.0%=enable and display format is
100.0%; (4)100.00%=enable and display
format is 100.00%; Operations refer to
section7
100%
100.0%
100.00%
BMI
YES
NO
Yes/No=enable/disable BMI function,
Operations refer to section8.
NO
COMPAR
YES
YES
Yes/No=enable/disable data comparison
function; Operations refer to section9
NO
ACCUMU
NO
MANUAL
Accumulation Mode selection: (1)NO=no
accumulation function; (2)MANUAL=add up
current number to accumulation memory
after TATOL key is pressed;
(3)AUTO=automatically add up current
number to accumulation memory after scale
is stable and weight is over (NLD.RNG)
MANUAL
AUTO
GEO.CAL
YES
NO
Yes/No=enable/disable Geographical
Adjustment Factor
NO
WT.ADJ
YES
NO
Yes/No=enable/disable weight fine-tuning
using keypad in weighing mode, if
(REGULAR)≠none, this item is NO
NO
* The setting will be limited by choice of REGUALA